3D One Car Scratch & Swirl Remover Hybrid Rubbing Compound & Polish Buffing Compound for True Paint Correction 8oz Made in USA

Listen, I’ve painted vehicles and done paint correction, including wet sanding and buffing and all those hours and days spent trying to get that mirror shine. It’s a ton of work. This was my first attempt at using an all in one polish to fix surface swirl marks and scratches. I will say, trying it by hand on a little spot first just to test it out blew me away. Next, I got out my polisher and really went to town on the rear liftgate. I could’ve spent more time on a cpl spots but realistically there were swirl marks everywhere. I have a 19 Explorer sport in a deep metallic black. It looked good before but when the sun hits it in certain spots you can see all the swirls. I have NEVER seen this car look wet like this after using this polish. It literally looks like glass or how shiny paint looks when water sits on the surface. The metallic is popping so much now my camera can’t even pickup the depth of the finish, it’s incredible! The photos make the metallic flake look like dust sitting on the paint (makes it look dirty) but in person it looks like a fresh clear coat straight out the booth. I literally can take a photo at any angle but the shine is tricking my iPhone camera and doesn’t know where to focus. I have zero affiliation with this company and don’t get paid or anything for reviews. I’m leaving this review because this product has absolutely blown me away and I can’t wait to do the whole car! It even corrected a deeper scratch that I thought wouldn’t buff out. Minimal dust, doesn’t dry out fast at all and a little bit goes a long way. This is without a doubt the best paint surface correction polish I’ve ever used and I’ve used so many professional heavy compound and polishes. Don’t think twice, this is the one guys 100%. 3D nailed it with this one! 🙌🏻🔥

I've had no issues with 3D One Car Scratch & Swirl Remover Hybrid. It works well, is easy to use, and leaves a nice finish without needing multiple products. I've used it on several vehicles, and it's consistently given me good results. If you're looking for a compound and polish in one bottle that cuts well while finishing nicely, this is a solid choice. I'd definitely buy it again.

Amazing. Truly a wonderful product. I previously used 3M rubbing compound which was good. This stuff is much better!!! I used it on some clearcoat damage from a water spot remover product. Used the wrong product on paint by accident. Also used after my spouse hit the cart return at Target and this removed those scratches and many others from the last two years. I hand applied and was happy with the results. I debated between this and AC 510. This was more than strong enough to remove scratches.

Good product and price. Will buy again

I have been on a quest to get my truck to look like it is professionally detail. AI and I have done exhaustive research. This is one of the first products I ordered. It is foundational. It protects your finish, the ph is neutral so it drys perfect and doesn’t leave water marks. It does 90% of the work for you. A quick pass with a glove is all you need on the most stubborn mud.

I really like this product! I actually use it as the middle step for paint correction of new paint. After sanding with 2500 grit paper, I use 3D's ACA 510 with a wool or course cutting foam pad first which leaves holograms behind. Then I use 3D One with a medium cutting foam pad and DA which removes all the previous holograms. Then, I use AAT 505 with a fine foam pad which removes any remaining halos from the 3D One (if any) and leaves a coat of new-paint-safe protection. However, I really could stop after the 3D One step. There are maybe the slightest halos left but I use the AAT 505 more for the wax than the correction. I could also use One with a fine finishing pad for the last step instead of the 505. The 3D One will NOT dry up so I can do the entire body panel at one time. I also add a little One when cutting with the ACA 510 because that will dry up too quickly sometimes. The 3D One will not buff out 2500 grit scratches no matter which pad you use so it's not a replacement for the 510, but it's perfect for getting out any left behind blemishes after going over the panels with a sun-light. Since it doesn't dry up, it does start to sling little drips everywhere. However, it does not dry white and easily wipes off of black trim and rubber. It takes a lot of wipes to clean off because it doesn't dry but it's still minimal effort, you just have to keep using fresh towels. I've also used it on old paint in good condition that had bad swirls from many trips through the car wash and it worked great.

Alright let’s just be honest here. If you need minor fixes very light scratches like from an auto carwash or maybe some branches from a trail this stuff works to get that stuff off also minor paint transfers does good there as well. But it’s nothing compared to a 2 or 3 step kit. If you want the swirl marks or all the scratches and imperfections fixed get a 2 or 3 step kit. This does go a good job polishing and giving a good shine. I used this stuff with a buffer and spent some time on just one section to see if it would correct all the scratches and it did not. The product is good but it’s not some super product that does it all. It’s kinda like a 2 in one shampoo it works but not the best.

Works really good. I recommend this product as step 2 (medium cut)

I have used several brands of compound in the past few years, but nothing compares to this 3D One 400. It is a pad specific compound, meaning that you can adjust the amount of cut or polish by changing the courseness of the pad. This allows the use of the same compound to do a heavy, medium or light cut depending if you are using a heavy, medium or light pad right down to the finishing polish. It has a fairly long run time, has absolutely no dusting, and can be used in direct sunlight. Wipe off is a breeze compared to some and leaves no halo's or ticks when paired with a sponge pad on a da polisher. The clarity is amazing, the cut is really good, and the finish is really deep and clear with no blemishes. I have now found my staple compound to clean up the paintwork on my vehicles. Well worth the money spent, and I will definitely purchase again. I highly recommend 3D One 400.

Excelente abrillantador y si tu auto no tiene tanto Microrayon te deja un muy buen acabado ya que si logra una buena corrección en un solo paso

Après plus de 30 ans dans le detailing, j’ai vu passer absolument tous les types de polish, des plus anciens aux dernières innovations… et honnêtement, 3D One est une vraie claque. Ce qui m’a immédiatement impressionné, c’est sa polyvalence incroyable. Pouvoir corriger et finir avec un seul produit, sans compromis, c’est quelque chose que peu de polish arrivent à faire aussi bien. La coupe est nette, efficace, et surtout ultra maîtrisable — on sent tout de suite que le produit travaille avec nous, pas contre nous. La finition est tout simplement remarquable. Sur des vernis exigeants, on obtient un rendu profond, brillant, sans hologrammes, avec une facilité déconcertante. Même après des années d’expérience, c’est rare de trouver un produit qui donne un résultat aussi propre aussi rapidement. Autre point énorme : le confort d’utilisation. Long temps de travail, très peu de poussière, essuyage facile, et une excellente compatibilité avec différents pads. Que ce soit en rotation ou en orbitale, le comportement reste constant et prévisible — un vrai bonheur pour un detailer. Aujourd’hui, 3D One fait clairement partie des produits que je garde toujours à portée de main. C’est typiquement le genre de polish qui fait gagner du temps sans sacrifier la qualité, et ça, quand on bosse depuis 1991, on sait à quel point c’est précieux. En résumé : un produit moderne, intelligent, et terriblement efficace. Une valeur sûre dans n’importe quel setup de detailing.

3d one + urofiber 50/50 pad. Perfekt resultat på min bil.

Not agressive enough for mercedes clearcoat