25004 Street Performance Lowering Strut

Fit my control arm dropped 2016 Silverado just fine. Ride quality is good. The ones complaining they don’t fit aren’t using the metal cup washer on top of the strut mount.

The adjustability is simple but very effective. I usually use monotube tube shocks heavy on compression and rebound however these twin tubes work very well on my Denali and Sierra. Both vehicles have struts dropped 2"

The ride is nice. Only drawback is once I got them installed my front end makes a chatter noise over small bumps.I'm assuming its the rings. I will try to lubricate them somehow to see if that goes away.

Very straightforward installation on a 2017 Sierra Double Cab. Adjusted to provide a 1" drop and had no issues with performing the alignment (Belltech 2" spindles and 5" flip kit also installed). To my surprise, the ride quality is as good or better vs. the OEM Z60 suspension. I'm thoroughly impressed with the Belltech Street Performance dampers, and would definitely recommend them.

Didnt lift my 2015 tahoe like i thought it would but does ride way better than expected. Night and day vs the oem. I added a 1.5 inch level kit to the shocks to get the lift, and man these shocks perform great on the road. Highly recommend them

I’m not sure if there is a manufacturing issue going on or what but the past two 25004 shocks I have bought do not work on a gmt900 truck (2007.5-2013 1500’s) not correctly anyways. That or they need to start supplying a .450 spacer in the kit. They step on the end of the rod is machined wrong and you will have 3/4” inch gap between your top spring perch and the bottom of your shock nut/washer. If you look at my pictures and videos, you will see the difference between the older 25004 (with two steps on the shaft) and the newer one(the one with only one step). This gap will cause a front end noise.

Honestly, I can’t think of a single dislike about them. They did exactly what I wanted. Lifted my front end to clear my 22x14s on 420s. I contacted Belltech directly, explained what I wanted to level the front, drop the rear 2”, and I wanted it to handle good. These were recommended and I couldn’t be happier with the outcome! This thing looks SIK AF, and handles like it’s on rails!

I didn't use this shock to lower my Silverado, I used the ihc control arms. Using this strut alone to lower your truck will never align correctly. However the valving gives a smooth ride for us older guys still running lowered trucks!

Good product truck rides and handles better than the factory ones. Also it comes with the lower spring mount which the Bilsteins don’t.

Arrived quickly. Work excellent!