QILIPSU Outdoor Electrical Box, 14.6"x10.6"x5.9" Waterproof Junction Box IP67 Plastic Enclosure Grey ABS Weatherproof for Projects WiFi Lighting Pump Control

I purchased the 8.6"x6.7"x4.3" SSL version and here are my thoughts on it for anyone using it for amateur radio: I purchased this size so it was thick enough to allow me to run coaxial cable into my house without bending the cable. This worked well and the metal tabs on the outside allowed me to attach it to my house (vinyl siding) easily without any modifications. The plastic didn't seem PVC durable and I felt if I drilled it with a larger diameter drill bit it could crack. To solve this issue I clamped a piece of wood on each side of the holes I intended to drill which prevented cracking and worked great. I also needed to cut a 2 1/8" hole in the back to run a PVC conduit pipe into my house so I could have several coax leads going inside. Again, I clamped wood on both sides and drilled the hole with no cracking issues. Later I needed to drill a small hole for my ground wire and using a small bit with no wood it came out fine. So what's my point here? If you're going to drill a lot of holes in this box to run cables and avoid cracking it use this method to prevent damage. The box itself seems like it will hold up fine. It's winter here and I've had no moisture issues but once summer storms roll around we'll see how well it works. I honestly do not anticipate any issues. I would definitely purchase this box again for future projects. The latches for the enclosure also seems fine. I did purchase "cable glands" which you can find on Amazon. This allows you to run cable and keep your holes waterproof. I mounted them all on the bottom of the case so I don't anticipate any rain water penetrating the box but, again, time will tell. Overall I'm happy with the intended outcome for amateur radio purposes. Last note. I ran RG-8X cable in and if I was to use RG213 or LMR400 I still think it would work ok with the larger diameter cables but if there was a lot of stress at the cable gland I might consider something a little thicker as this case is slightly on the thin side from a durability standpoint.

Has been installed for 7 months and its making it through a brutal winter here in KY. No problems at all. Very good product. Thank you!

High quality waterproof enclosure. Has pegboard backplane for easy attachment of controls, relays, etc. Moved my indoor-rated sprinkler controller out of garage to side of house and needed to protect it. This waterproof case was an easy and cheap solution. Very pleased with the quality, includes stainless hardware, o-ring gasket and durable snap closures. Should last a long time.

I really like the 6” x 6” junction box. It’s a clean looking box and appears to be high quality. I read some reviews that noted two “problems”. First, I read some complaints that the box doesn’t have knock outs to run cables in and out of the box. I really appreciate this feature of the box. The only holes in it are the ones I cut and those are the exact size and I’m the exact location I chose; perfect for a water proof box. Second, I saw that someone was disappointed that the only mounting option is the tabs that, when attached, stick out from behind the box. My solution is to not use the tabs. Instead, drill holes through the back of the box where you want to put screws through to mount it. The tab mounting holes in the corners of the back of the box make a just about perfect guide for you to drill your mounting holes. One screw up I made: I didn’t secure the box well enough to my bench when I was drilling a 3/4” cable hole in the back (with a paddle bit). This scratched up the front and I was pretty put out by my own impatience (I had used one clamp to hold it when I should have used two). But light sanding using fine steel wool erased the scratches and demonstrated how solid this little box is. I’m extremely pleased with the final installation and quality of the totally customizable little box.

Good for what it needs to do. Great size for the price vs other options on Amazon. Was able to fit 2 pairs of adapters and controllers for govee lights easily. Saves them from the elements. Couple of cons though. Doesn't have cutouts for ease of use, so you need to drill holes which is time consuming and needs right tools. Doesn't come with npts for clean Waterproofing.

Perfect box to mount a flo by moen smart shut-off valve/leak detection. This installation was outdoors and I needed a good weatherproof box to mount it in. This did the trick! Solid construction. I drilled a few holes in it for my water lines and the power supply. I didn't use the included brackets to secure it to the exterior wall i simply drilled a few tapcons directly through the back of the box into the stone wall. The box is very secure on the wall! Overall a great product! Door seals tight and feels firm, rubber seal prevents water from getting in.

Great product Great quality!!! Recommend to everyone!!!

OVERVIEW These have been a great purchase. Setup and installation was easy. QUALITY After doing research on other similar and competitive items - I chose this product. I am happy that I did. PROTECTION I bought this (two actually) to provide protection for outdoor wireless access points. The access points are not cheap and I wanted something I could easily get to the device while providing a high level of protection. These fit that bill. Waterproof - yes. Sun proof - yes. Freeze proof - unknown. DIMENSIONS The dimensions were important to me as I needed to fit the “TP-Link Deco Whole Home Mesh WiFi System (Deco S4)“. The Deco fits nicely within the junction box. WIRELESS FRIENDLY I did not experience measurable degradation of wireless signal when placing the Deco in the box. Granted I wasn’t using sophisticated RF measurement devices - but the apps on my phone were not reporting a huge dB drop. I used the Deco app and the signal value did not change. Strong signal two yards over (somewhat occluded line of sight too). I am a happy customer.

ok

La caja esta muy buena, y algunos componentes le quedan muy bien, pero, te lo venden en paquete con un contacto que no le cabe dentro.

Exactly as advertised. Was so airtight when I received it that I thought it was possibly defective (spoiler: it was NOT defective)... Took quite a lot of force to open, only to hear the suction as I did. This thing was so airtight, I couldn't open it with the negative internal pressure from flight, excellent!

Good price to quality/option ratio. I like that it has hole for a lock on the door; would prefer for a larger lock hole diameter... to fit the standard safety locks. "Glass" is dirty, scratched and scuffed up. :( It came in a plastic shrink wrap, so I assume that it was damaged at the factor. Makes me wonder about what other things they overlooked, so I bumped the review down another grade just because I assume it could be a little more rugged at the hinges.. An ounce of quality control would make this a five star product for me.

Expensive little box for not coming with hardware…