ECOTRIC Front Stubby Bumper Compatible with Wrangler JK JL Gladiator JT

This bumper is really nice for a cheap bumper. Packaged really well smooth welds not to thin. Not bent or damaged at all. The bolts aren't the greatest id say they'll rust quickly. The rest of the bumper is painted well.

Had to hammer the bolts to make them align on one side but love the bumper. Looks great!

This bumper is honestly the most inexpensive bumper I could find, probably cheaper than just a winch plate. For that alone, it is a tremendous value. It feels stout, I like the style, and there's no gaudy branding cut into it (I'm looking at you EAG). The hoop is a fat tube, and looks meaty (even though it's only attached via 8 small bolts).Cons... One of the d-ring mounts was welded crooked, so it looks kinda wonky, but with the shackle on it, it's not too noticable. The light tabs are a bit deep and low on the bar, so I'm unable to aim my Hella 500's down enough; I can probably correct with about a half inch stack of washers. I do wish there were some holes drilled into the tube to route wires, but I can punch my own. The package was pretty bad.. It was basically wrapped in felt and a 1/8" thick foam blanket, then cardboard wrapped around it (no airspace or cushioning). Amazingly, nothing was bashed in from shipping, but there were a couple (very minor) dents and scratched off paint on either side of where the winch mounts. No biggie, a dab of bed liner will hide it I'm sure. It doesn't come with nuts for the main mounting bolts, and I'm not sure if the factory nuts are compatible, but I ordered some from Amazon anyway (not here yet). But overall, I couldn't be happier with the value and appearance.I'm going to attempt to install onto a 2019 Wangler (JL), as rumor has it, JK bumpers are compatible. Will update when Amazon delivers the rest of my order.Edit: It fits JL Wranglers, no problem. There's maybe 1/2" gap between the bumper and the grille at the closest, so, no rubbing, looks like it was meant to be there. My Sport plastic bumper halogen fogs are the three-tab style, and this bumper takes the four tab style, so I had to drill a couple holes in the fogs to use them, but it worked out in the end. You'll need your own bolts to mount them. Hopefully there's no rubbing when the winch shows up.

Quality is light duty but with a few extra bucks in grade 8 hardware this is a very usable mount. I also added a 1/4" plate under the winch so the bolts dont pull through the light metal it's made of. I used it several times and a couple of them where hard pulls. The D-rings would be good for maybe keeping a Chihuahua tied up to the porch but just maybe. The mounts that the rings hook to are actually very very well made. I use soft shackles and they slip right through the holes. I opted to not use the over loop. It wasn't bad looking but sometimes less is more. If you have a budget and don't want to spend 600$ + on name brand that does nothing more than this can do this is your ticket. Very easy install. And the light holes all line up perfectly.

You know that saying "You get what you pay for..." Arrived super well packaged, I mean I have purchase countless bumpers from the internet and this may be the best packaged one I have ever gotten. That is where the praise ends. Horrible welds. Blown out holes that were not fixed. The coating poured out of the packaging and all over my floor and chips off when you look at the bumper. The one really concerning item to me is that there is a gap between the front layer of the bumper and the mounting surface of the back side of the bumper, meaning you can easily over tighten the mounting hardware and deform the bumper and any impact would likely destroy the bumper. Would make a great bas for someone wanting to modify the heck out of a bumper.Update: It has been about 6 months and the coating on at least 1/2 of the bumper is about to pop off.

So from reading all the poor reviews I order this bumper and there are goods n bagsGoods: they improved the holes to the bumper and attaching to the jeep itself was perfect,I assume they listened to the complaints. It's heavy material for sureBad: no instructions besides a crappy video, the bumper itself was sitting outside then they bring it in to spray the power coat there is rusting from some parts. When taking stuff out the bar that runs on top of bumper was filled with metal pellets and box as others claim was damage but bumper itself I was lucky got only few dings (I'm not picky) but other then that I would rate it 50/100 it's good for 100$ but can't nitpick on pricing. Coming from the OEM to this so if u got the money get the named brand if u have no preference.Can't give info on winch tests or trials cause I don't have but I'm not too sure it would hold without bend or warp

Great stubby bumper for the money. There are other bumpers that are almost identical, but cost more so I went with this one. Is it going to hold up to trail abuse? I can’t imagine that it will. But it has the look and gives clearance for larger tires. Factory fog lights mount easily, but you’ll need to provide screws for that. I used some sheet metal screws I had in my shop.As another reviewer said, you will need to purchase some hardware in advance and you should absolutely install the bull bar and lights BEFORE attaching to the Jeep.It was packaged extremely well, but still had two small scuffs in the finish on the bull bar so I touched up the paint with some satin black Krylon before installing.*UPDATE* I sold this Jeep to a friend not long after installing the bumper. It still looks great with minimal rust.

ECOTRIC Front Bumper is indeed an invaluable asset, in fact, it can easily fit a custom setup like mine which is a C-10 wheeler! First it was made for Wranglers and Gladiators but after some minor modifications, it goes on my truck really well. The front bumper is very robust and stiff and can take a lot of abuse on rough terrain and most importantly, very good for the front end protection.The off-road bumper offers a rugged and aggressive look, which perfectly matches my off road setup. Moreover, the built-in winch plate and D-ring mounts are fantastic features that allow for easy recovery scenarios. In addition, it adds beauty but is also very practical as it’s highly resistant to rust and scratches – the powder-coated finish.In terms of fitment and modification, I’d say it was a struggle worth going through. This bumper completes the shape and function of my truck as it ready for the trails and also looks stunning. I would recommend this product to all the customizers out there; for adventurous drivers, this is an amazing product!

注文してから3ヶ月ですが届きません。連絡しても返事はありません。まぁまぁいい値段なので、返金して欲しいです。

Good for the price. There were marks through the finish from moving in the carton. Also where the fairhead for the winch attaches was bent a bit. Can straighten it. Need some better packing.There was rust dust on the hoop and in the plastic bag it was in. Coming from the holes for coating. Hopefully doesn't cause an issue. Haven't installed yet so not sure about fit.

Item came in well packaged but the powered coat was already flaking off. I figured for the price I might as well keep it and spray some bedliner on it. It’s a Jeep. After I got everything installed I realized thr driver side fog light was slightly off. After taking a closer look the welds were wrong and I permanently have a cockeyed fog light. Price is great, quality is well below what you’re expecting.Buy something else……

This is a solid bumper for the price.The welds are not great but not terrible either. I am not worried at all that it will fall apart but i predict its gonna rust easily. (Thats just a wild guess)Packaging was amazing full of urethane to protect everything 10/10 nothing to say.Hardware is missing for the fog lightIt will not fit the bumper you’ll need to go and buy some for yourself(no big deal)The brackets for the shackle looks solid toMe but i didnt put them to the test yet.The stinger add a very nice look.Overall i’ll give it a 8.5/10 for the look & priceI would buy it again.

The bumper arrived in probably the nicest packaging I've seen. It was wrapped in a nice blanket with a foam box all around it. The cardboard was damaged because delivery drivers seem to enjoy throwing packages around but the bumper itself arrived in good shape. For the price I don't have anything bad to say about it. The key is to manage expectations when purchasing a budget item. It's a great deal. If I had to nitpick then I'd change the quality of the bolts. Also there's no way to mount a license plate. The only actual spot I could put it is between the fog lights and even that's a bit tight as the plate will obstruct a bit of the lights. All in all for a budget bumper it gets two thumbs up from me.