Aluminized Heat Shield Thermal Barrier Adhesive Backed Heat Blanket (12'' X 24'')

Love this stuff.

Okay, I read the reviews and I was reluctant to purchase this product because some people complained about the adhesive and another said the foil peeled off, so I initially purchased the other “skin” product. That stuff was pricy and has it’s own issues. So on my second project I took a chance on this. It works great. I did clean the firewall with rubbing alcohol to remove any gunk. The foil did NOT peel off. It was on pretty good actually. It conforms to the firewall much better than the other product and sticks very well. Repels heat just as good if not better and was easier to cut with a utility knife. The other product shredded when I cut it.

Very nice material. Got this to wrap over some exhaust simulators and get additional heat protection.

Used this on the underside of my 1970 mopar to protect the gas tank from the exhaust pipes. Great adhesion. Going on a few months now and it's still on with no ripes or peeling. Easy to put on, just make sure you have it lined up beforehand. Doesn't really come up once placed down.

I needed to shield the bottom and a bit of the middle as well as the wiring of some LED rings from the extreme heat of almost direct contact with a 150W ceramic reptile heating bulb. (Needed a non light emitting heat source to run the lamp because normal bulbs would wash out the LED light) I don't know how hot that bulb can get (I melted a desktop thermometer trying to test it. lol Whoops) but suffice to say it's hot enough to give an instablister if I touched it. Yet this stuff is easily good enough to shield the LED from the heat. With a single layer of tinfoil too I added just for good measure anyways. But that was only on the middle part. The underside and the wiring is all this stuff. So this worked out well and being self adhesive really made it easy to use. I'll definitely be buying more if I ever have to shield some small things from heat.

I lifted my truck, which changed the tire size from 16 to the larger 18. The new spare I purchased fits much more tightly in the carrier under the vehicle, butting-up against the heat shield for the tailpipe. Though I've observed it really doesn't get that hot, I decided to add a layer of this material on both the inside and outside of the shield, just as insurance the tire will suffer no heat damage in the future. If the adhesive holds, long-term, it should be helpful, in that regard. I find this product easy to work with, cuts nicely, and sticks well initially.

Good quality, seems to work fines have had 6 months and haven’t had any concerns. Used this on my 96 Yamaha Grizzly.

Initial application is somewhat difficult to apply. Separating the backing from adhesive side is difficult at best. Once that’s achieved there’s no problem. Anyone who has a can am knows how hot the exhaust side is on bare legs. Hopefully this will resolve this issue. I’ve tried exhaust wraps but over time that’s failed.

Good

Not sure what kind of tape they used, unable to stick at all. Useless product