LitOrange 8 PCS Replacement Spare Food Grade Silicone (Better Than Rubber) Gasket Seal Ring For Aluminium Stovetop Coffee Maker Pots Bialetti Moka Express Dama 6 Cups

I bought a vintage 6 cup Stella Moka pot from an antique shop in Italy that had a disintegrating gasket. This product was the closest fit I could find so I took a chance. The fit was perfect! No gaps, no leaks, and my Moka works perfectly!

I left my classic aluminum 3-cup Moka Pot on the burner for like half an hour on high, which turned the coffee into lava and the rubber ring into an oozing sticky mess. I thought it was a total loss, but amazingly enough I was able to boil the coffee out, and a solid half-hour of cleaning with Goo-Gone removed the ring mess. But now, no ring. I was going to buy a 3-pack of replacement rubber rings, but I saw this when I looked around. I figured, no big loss, so I ordered this. WOW! Great replacement. First, no rubber smell at all of course (they're silicone). Second, they're slightly thicker than the rubber rings but they seat really well and I think the two halves of the pot are slightly easier to separate after making coffee. Third, they're just a hair smaller (and thicker) so they easily pop out when I'm cleaning the grounds strainer, with the result is that it is _much_ easier to clean. I also bought a 4-cup Moka Pot Induction, and the first thing I did was put in one of these rings. HIGHLY RECOMMENDED, even if you don't need a new rubber ring yet.

Must have upgrade!

These gaskets are the perfect size and fit for my Venus. They are about a millimeter thicker than the stock gaskets. Initially I had a some difficulty getting the gasket to seal properly. After giving it a little thought I came up with a solution. If you are having an issue getting these gaskets to seal all you need is a little lubricant like olive oil, MCT oil, or any food safe lubricant. Install the gasket as usual. Once it is seated simply get an small amount of oil on your finger tip and rub it on your gasket. Close the moka pot as usual and it should seal perfectly. Sometimes when you tighten the moka pot it can grip the gasket and deform it preventing a good seal. An extremely small amount of oil can prevent this issue for a perfect seal.

First off, it works and it is very unlikely you’ll use all eight unless you have 8 moka pots. The thickness is the same as the original. The diameter is a little off though. The inside and outside diameters are looser than the original so it jiggles when you shake it. That doesn’t seem to affect the performance though. The silicon makes a great seal and the pot works as well or better since it stays pliable.

Absolutely perfect fit and seal for my 6 cup Bialetti Mocha Express. These silicon gaskets are extremely durable..... I have had one in my other Bialetti for 6 years and it is still almost like the day it was put in. Also SO much easier to unscrew the pot with these instead of the rubber gaskets. Only wish i could buy one or two..... at least 6 of these will probably go to the grave with me !

This claims to fit the 4-cup Moka pot, but it does not.

My old/classic Moka express stopped brewing. It still would not work after replacing the rubber gasket with a brand new Bialetti spare. I decided to replace the old funnel filter as well, as it was a bit bent, which improved somewhat but that did not fully solve the problem. Only after I installed the silicone gasket, the coffee started to brew/flow again. Seals and works great now.

Perfect fit and good product

Fit my Bialetti Brikka 4 cups perfectly

Fits and will use when old ones wear out and leak. Good price.

The 6-cup size worked great in my 6-cup Moka Pot right out of the package. No "break-in period" like with the natural rubber gasket from Bialetti. If these last 3 years like some other reviewers have noted, then this 8-pack might well last me well into old age. Downside: Compared to a broken-in rubber gasket, I have to screw my Moka Pot together a little tighter to get a good seal with these silicone gaskets. That can make it harder to unscrew for washing.

They are a bit thicker than the standard ones that came with my pot and I was a little worried. But they work just fine, and they are a little extra spongy with that extra thickness so I find I get a better seal with these.