The Rich Barber On The Money 10-Second Blade Setter - Zero Gap Tool for Razor, Barber Blade Alignment, Close Shave, Clean Fade, Sharp Line - Hair Stylist & Barber Tools for Home & Professional Use

Bought a new set of blades for my 12 years old T-Outliners. Already had the blade setter ordered that was going to arrive a day after the new clipper blades. Tried the new clipper blades as set by the Andis factory. Shaved my face, and the blades did not bite, but they did cause razor burn on my tender neck area making it red. Reset the blades with the blade setter, and next shave was perfect. No more razor burn on my neck. Apparently, the Andis factory had set the new blades a little bit too tight. Not happy about the cost. It's just a small piece of plastic. On the other hand, it did work good for my T-Outliners.

I've been shaving my head with clippers for over 20 years now. It wasn't until recently until I learned of zero gapping them for a closer shave. It was also recently when I found out how complicated and tricky it can be to zero Gap a pair of trimmers or clippers. This guy deserves to be called the Rich Barber and I hope he continues to make massive amounts of money on this product because he deserves it. On my first try and within 2 minutes this thing was perfectly zero Gap and shaving my head and everything else beautifully. Well worth the money. Also in knowing that if I ever have to remove the blade for any reason I can still line it up just as perfectly in the same amount of time. I can also see how intensely useful it would be for a barber who is cutting several people's heads a day. Now if he could make one for Wahl clippers, he could rename himself the Super Rich Barber lol

Literally received this 20 minutes ago, along with a replacement blade for my liners. Worked the first time I used it. If you install the blade with the setter still attached, as I did, it keeps the alignment and make things so much simpler. As one person mentioned in their review, you won't need much pressure when using your clippers. Additionally, I am not a barber. I use my clippers to shave my face and head, as I have very sensitive skin

Loved this product, I had bought a pair of Andis T liners that weren’t zero gapped from the jump. I bought this item without high expectations. Man was I blown away. It’s not just easy to use but made my clippers sharp and precise. It only took 10 seconds to make them straight and zero gapped. I highly recommend this product and the blade modifier. You will not just save money but will be investing in a young ballers company. I was not paid for this review, I legit wanted to leave one because of my frustration on some crappy blades that came with my andis.

Don't mind my grays in the pic lol.. it was taken after one single pass using Andis T-Outliners adjusted with the Blade setter. I've been using Andis Outliners II or T-Outliners for 20 years now. I typically go to the barbershop once a week (pre-COVID) as I like to keep the cut very fresh. I've encountered a many barber that do a decent job of lining up - I have also encountered my share of barbers that ruined a good cut with a bad line. Either way, I have been in the business of doing it myself and I tend to do a much better job because I'm taking more time and care with my own head lol. I also use a straight edge to shave as well as touch up my line. Ok, enough with the background. For 20 years I have been without, but no more. This tiny little inexpensive piece of plastic has taken my Andis to the next level.. it's SERIOUS. I will never, ever, EVER NOT use this to set my blades ever again! Out of the box, the Andis are okay.. this takes them a few levels higher. Every single day, I'm looking like I just stepped out the chair. And there's no razor burn, it's a very clean and close cut. And since they are so precise, so far I have not had to push my line back at all.. which, if you use Andis right out the box and do not use a straight razor.. well, you'll very likely be pushing your line back just to get a nice edge up.. this level of precision has given me wings like Redbull lol.. Now I've read a couple reviews where they say it cut them pretty bad.. well, although I have been lining for 20 years, this was my FIRST time ever setting the blade with any tool.. I followed the instructions and they were very simple and straightforward. In the end, the moving blade is MUCH closer to the stationary blade but it's actually not perfectly lined up evenly with it.. there is still a teeny bit of overage of the stationary blade if you look close enough so it's not "literally" zero gap. Well, THIS is exactly what you want. If the blades are exactly dead even then a) you did something wrong and b) you will very likely cut the hell out of yourself. All in all, I just had to come and write a review to give props where props are due. Thank you guys for making such a great product.

I get a sharper cut when i zero gao them myself. This little item works great for kids though. It does not make the blade cut sharp enough to leave cuts and nicks on them. As for me i have no use for it. I'll give them another try but as of now, if you're looking to make your blades cut close this isnt what you want. This is coming from someone who also purchased the 1min blade modifier, do with that information as you will

I purchased this item after going to my local barber. The brand he swears by is the andis. I ended up purchasing a t-outliner a month later after his recommendation, and haven't regretted it. I had him zero gap mine when I purchased it. He free handed it because he did the same with his. The trimmer cut great but on occasion would get a little too close while trimming my son's neck. I then purchased this item and what a difference. It seriously only took me 3 mins tops and I had that thing dialed right in. I would definitely recommend this item to get your trimmers perfectly alligned.

This product is amazing! I've had my t outliners for about 18 months. Before using this on the money trimmer, they've never hit very hard, meaning the line was always good, but never great. The out liners always required multiple times going over the same area of the head when lining up a haircut. After I used "on the money?" Ooohwee!! Night and day. One time and the hair is crispy! I love this product and I recommend the hell out of it. If you're even halfway serious about cutting hair, buy this now! One point of caution. Take Care to be gentle on younger clients' hair until you're used to how the on the money blade setter changes the out liners. They're more effective, so be gentle. Awesome product.

TL;DR: It's awesome. I've been using an Andis T-Outliner for something like 12 years now on myself. I've replaced the blade several times and zero-gapped each time using the mirror method. Most of the time, you do it the first time, looks good, you test it, it seems ok, then you're using it, and you get a nick or pulls, so then you have to stop, clean it off go back to your desk with a screwdriver, try again being a little more conservative this time, looks ok, close it up, rinse repeat. I never realized how much time and mental annoyance this caused me until I got this. This simple little device, cuts the zero-gap time down to like under a minute (I like to take my time and be cautious. I'm not speedrunning zero-gapping), and gets it perfect THE FIRST TIME. So efficient, and now I have it for any future blade replacements. Definitely a must-buy if you have an Andis that you want perfectly zero-gapped. This tool made my personal grooming life so much easier and more efficient. Highly recommend.

Quality, well made bit of kit. A bit expensive but it does the job very well and it's made for purpose.

Just as advertised. These worked perfectly to zero gap my Andis T Outliners. Had issues trying to eyeball it and ended up cutting myself a few times. These were well worth the price. No more cuts!

No fuss way to set your blades. Eliminates the fuss; did mine in like, a minute. Much, much easier than eyeballing or using a hard surface, or any of that stuff – save yourself the time and invest in something like this. It's small and lightweight, too. Should consider making one for clipper blades such as Andis US Pro/Fade...

I think it is a good product but atill struggling to ajust my Andis T outliner.. lets give another try and try to watch more youtube videos..