Stainless steel wallpaper for kitchen

Love this. Great quality, easy to use and didn’t wrinkle when applied. Makes cleaning so much easier and it looks great. Highly recommend it. I use electric ranges and covered a wooden surface where the units sit. It makes cleaning a breeze. It does have some air bubbles at the folding edge but it really isn’t an issue.

This a life saver for sure! We bought a refrigerator and decided to move it ourselves and banged and scratched it up very bad it literally look like something you would use for scraps. THANKFULLY this refrigerator wallpaper is a thing and it did a wonderful job at masking the scratches and damages.. My only problem I would have is ,is that the application isn't so easy I kept having to reapply it to avoid air bubbles..But once I managed that I was ok ,the results are great and literally saved our day and refrigerator.. it now looks aesthetically pleasing! AS YOU CAN SEE IT BLENDS WELL WITH THE ORIGINAL COLOR OF THE REFRIGERATOR, I DIDNT APPLY AND ON THE BOTTOM DRAWER

The quality is decent and the appearance is very good. It is very hard to apply without bubbles and creases, so technique is very important. The adhesive is OK, but not super strong. It does not adhere well to wood or semi smooth surfaces, it needs almost "glass like" surfaces to stick well. Seams are visible but not too bad.

Love it! It does give a better look.

Good product

I purchased this product because the dish washer panel does not clean well. It always looks stained and dirty. I was surprised by how easy it was to attached the Brushed Nickel Peel and Stick Wallpaper to the dish washer front panel. I measured and cut the pieces. It is staying secure on this appliance. It is easy to clean.

I used it to cover my refrigerator. Came out real nice. I'm happy with the results.

My wife an I are giving our small apartment kitchen a facelift. After painting the cabinets, we used contact paper as a backsplash and put contact paper on our kitchen counters to make it look like marble. Everything was going smoothly and looked exactly like we had envisioned. The cherry on top of our kitchen facelift and the part we were most looking forward to most - covering the appliances with the Livelynine Removable Stainless Steel wall paper. We live in an apartment and can't paint the applicances, so we thought this was the perfect solution to make them look great. Since we already mastered covering our kitchen counters with contact paper (from a different brand), we thought covering relatively flat kitchen appliances would be a breeze. Nope, it wasn't. Not even close. Thinking I would start with the easiest appliance, I tried to cover the dishwasher front door (only the flat surface below the controls - not the controls themselves). I followed the directions and watched several YouTube videos. Between that research and the experience with the kitchen countertops, I thought I was prepared. After slowly laying out about an inch or two, I realized I had a ton a bubbles. I tried ironing them out with the tool I bought specifically to use to flatter the contact paper. And tried again. And again. And again. It didn't work. So I tore the paper off, threw that wasted piece away, and figured I'd regroup and try with the refrigerator the next day with the help of my wife. Our refrigerator front doors are not perfectly flat. There is a curve to them. Despite our best efforts for three hours, we could not get the wall paper to lie perfectly flat. There were a lot of bubbles that were impossible to remove. Pin pricks didn't help make them go away. We're thinking because the design of the refrigerator doors - which are a bit bowed from the center to the sides, we would never be able to get a perfectly flat, perfectly smooth surface with this wallpaper. You might be thinking, "But it sounds like they weren't careful when the applied the wall paper to the appliances." I assure you, we pre-measured everything out, dry fit before very slowly peeling off the back and, and mapped out exactly what we would do. We're by no means professional renovaters, but this is far from our first DIY project. Unless you have perfectly square appliances with perfectly square 90 degree corners and sides, I would highly, highly recommend staying away from this product. It's not worth the headache. We did finish the refrigerator, and it does look great from about 15 feet away. Up close, however, you can clearly tell it's a wrap, and it doesn't look realistic. Because of all the imperfections, this will fool no one. I'm also surprised some people say you can hide seams. That's not even close to our experience. Because there is a shine to the wall paper, you can clearly see where the seams are, because the refelction stops and starts again at the seams. PROS: The material is thick and is easy to wipe off. It looks like it would be very durable. CONS: Very, very, very difficult to cover appliances without bubbles and imperfections showing. If you make ANY mistake with this stainless steel wall paper, it will show. Unlike the contact paper we used to cover to cover our backsplash and our counter tops, you cannot cut out a small piece and cover up your mistake. Because of the nature of the paper, all your imperfections will show and if you do cover it up, that patch will show. VERDICT: If you're planning on viewing your appliances from far away, then sure - this would work. But if you actually plan to use your appliances and lots and lots of imperfections bother you - we'd recommend staying away from this product. We ended up tearing it off our refrigerator and decided to just keep it white. It may not look stainless, but at least it doesn't look like a bad arts and crafts project.

beklediğimden güzel çıktı.Teşekkürler ederim . Montaj sonrası ayna gibi parıldıyor..

Perfekter Edelstahl-Look, einfach zu verarbeiten. Klebt zuverlässig und war für meine Zwecke ideal. Tolles Preis-Leistungsverhältnis.

Aningen för skimmrig finish. Men fin overall! Ps, fäster inte bra på matt trä.

It's average quality and bit thin and adhesive can do better for the price.

Bueno