6 Pack V Shape Led Aluminum Channel for LED Strips, 1Meter/3.3ft Aluminum Profile with Milky White Cover, Led Track Diffusers with End Caps, Mounting Clips and 90 Degree Corner Connector

Perfect for the led’s around the ceiling. Easy to for, you screw or use the double sided tape.

Great product and great price

I bought these LED channels for my first LED strip install. They come well packed and arrived without damage. All the fixings are included to install them in wood or brick (different length screws, rawlplugs etc). I've actually used the longer screws to fix directly to plasterboard and had no issues as the channels are light enough to not cause a problem. The aluminium channels are easy enough to cut with a junior hacksaw and the diffuser can be cut with a pair of scissors. One tip I picked up is to offset the joins in the diffuser lengths from the joins in the aluminium channel - that way you can minimise the visibility of the gaps. In the v-shaped channel there is a gap behind the LED strip that I've used to route a couple of wires for power injection. Overall, I'm very happy with the quality of these channels but a little disappointed with the thickness of the diffuser - using 60 LEDs/m at 50% brightness, the individual LEDs are still visible (it doesn't really come across in the photo). If I need more v-shaped channels, I'd buy these again

Fitted these into my sons bedroom and he loves these, makes the led runs look professional and smart. First I installed the holding clips onto a black painted long wooden baton. Then once happy they were in line and even, secured the baton to the wall with screws and rawl plugs, then placed the aluminium channels into the clips thereby hiding the fixing screws. They make a nice click sound when inserted. Then ran the self adhesive led strips along the channel, I didn’t need any extra glue as they adhered well to the aluminium. Finally I installed the diffusers, I did have a little difficulty with the first one, but by the 2nd I had it down. I found inserting one end in at an angle allowed it to fit into the channel and then ran my fingernail along the edge pushed the the diffuser in easily. Unfortunately the photos I took don’t do it justice, the diffuser does a good job of softening the led lights and helps to give a more even glow. Can’t wait to start placing them all over the house now. Awesome product.

Came nicely packed. More than enough clips, screws and wall plugs. Went up very easily. Had a problem to start with attaching the moulding to the clips. I couldn’t easily engage the clip on both sides of the moulding. Solved by using a thin blade under the clip to ease it onto the moulding. Result!

Nice quality way to fit and cut trim for led strip The end caps don’t fit tightly so a little adhesive was required the low intrusive profile is good and the diffuse fits great and well ( you’ll need a blunt tool to start it off but once it’s started it’s easy

This is an odd mix of well and poorly designed elements. The diffuser cover is difficult to fit, the instructions suggest sliding it on but the lip is not wide enough to hold it so that's impossible managed to click on at least one but it was tricky. The corner pieces are a mixed bag, the strip has to be threaded through them first as there's no other way to get them on which renders the mounting holes pretty pointless in continuous sections - if only they had been in two parts a back and front plate that would have made the whole process so much easier. By contrast the wasll mounting brackets for the straight section are a simple clever click in design. Not sure what the final effects will be but a few small design changes would have made things much simpler.

Very nice product, I used these with led cob lights I purchased on amazon and the 12mm less fit perfectly, the diffuser is excellent as well, really decent product. My one negative is the fact that you can see the clips when they are on the wall, if I used these again I would opt not to use the clips but glue them up instead. Overall though they are very well made.

Ich habe die LED-Aluprofile unter meiner Treppe verbaut und bin mit dem Ergebnis sehr zufrieden. Das Licht wird gleichmäßig verteilt, und der 45-Grad-Winkel sorgt für eine angenehme indirekte Beleuchtung. Die Profile sind stabil, lassen sich gut zuschneiden und wirken hochwertig. Insgesamt eine tolle Lösung für dezente Beleuchtung im Wohnbereich.

Top qualité, compatible lighstrip Hue.

Som förväntat.

The Aluminum is very thin, so very delicate and easy to damage. Of all the items listed in the photos, only the channels, covers, metal clips, and 6 end caps were included. No corner pieces, screws, anchors, or other items were in the packaging. Package came wrapped in black plastic, not a box, so looks like it was a return. Was cheap for a reason.

Fungerande kanon till min Trappbelysning