Peachtree Woodworking 2" BOWL SANDER KIT - PW15

As someone who spends hours at the lathe shaping and perfecting bowls, I’m always on the lookout for tools that can improve my workflow and results. The Peachtree Woodworking 2" Bowl Sander Kit has proven to be a reliable and efficient addition to my shop, particularly for smoothing those hard-to-reach curves and interior surfaces. First Impressions The kit includes a 2" hook-and-loop foam sanding head, a comfortable hand-held grip, and a selection of sanding discs ranging from coarse to fine grits. Right out of the box, the quality of the materials is evident. The foam pad is firm yet pliable, allowing it to conform to the contours of a bowl. Performance Ease of Use The head design really shines when sanding the interior curves of a bowl. Unlike traditional flat sanding blocks, which can gouge or skip across rounded surfaces, this sander glides smoothly, leaving a consistent finish. The hook-and-loop attachment system makes swapping discs fast and easy, which is particularly helpful when working through multiple grits. Control and Comfort The tool and shaft are long enough to give good leverage, but compact enough to maneuver inside smaller bowls. The foam pad absorbs some of the vibration, reducing hand fatigue, even during longer sanding sessions. Results The sanding discs are of decent quality and hold up well for moderate use. While they might not last as long as premium abrasives, they perform adequately and produce a smooth, even surface. I was particularly impressed with how the kit handled end grain, which is notoriously tricky to sand cleanly. The foam pad’s flexibility ensures that the sanding action stays even, reducing the likelihood of flat spots or uneven surfaces. Versatility This kit is not limited to bowls. It works equally well on smaller turned items like goblets or vases, and even on non-lathe projects where curved surfaces need attention. The 2" head size is ideal for medium-sized projects, though for very small or very large pieces, you might need additional tools to complement it. Durability and Maintenance After several weeks of use, the tool has held up admirably. The foam pad retains its shape and doesn’t degrade under normal use, and the hook-and-loop system shows no signs of weakening. A quick clean with compressed air after use keeps everything in good working order. Pros and Cons Pros - Excellent for curved surfaces, especially bowl interiors. - Hook-and-loop system allows for quick disc changes. - Produces a smooth, professional finish. Cons - Sanding discs could be more durable; consider upgrading to higher-quality abrasives for frequent use. - The 2" size may be limiting for very small or large projects. Who Is It For? The Peachtree Woodworking 2" Bowl Sander Kit is an excellent choice for hobbyists and professional woodturners alike. It’s perfect for those who want greater control over their sanding process and are willing to put in a bit of elbow grease for a top-notch finish. While it may not be the only sanding tool used on a project, it’s an invaluable supplement for detailed or precision work. Final Thoughts The Peachtree Woodworking 2" Bowl Sander Kit delivers exactly what it promises: a practical, well-designed tool for achieving smooth, consistent finishes on curved wooden surfaces. While it has a few minor drawbacks, they’re easily outweighed by its versatility and ease of use. If you’re serious about your woodturning projects, this kit deserves a spot in your toolbox.

Worked until it failed. Would not buy again

I'm surprised at the number of negative reviews of this product, and I wanted to share my positive experience with it. I made the bowl shown in the picture using basically two tools: the Lancelot grinder blade from King Arthur's Tools , and this bowl sander. The Lancelot tool is essentially a small chainsaw blade, so it leaves a very rough surface. To get from this roughed-out bowl to the polished finished product, I naturally had to remove a lot of material, and I did all of that with the Peachtree bowl sander. I started with some 40 grit sanding disks from another seller, worked my way up to 220 disks, and then did some hand sanding with 400 paper. (I'll get some 400 grit disks for my next project.) The bowl is about 10" across and made from ambrosia red maple, by the way. I had no problem with the hook-and-loop layer separating from the foam part of the sander, as some others have reported. Indeed, after finishing this project, the Peachtree sander shows no signs of wear at all. Perhaps this was because I was careful not to let the sander get too hot. I kept the speed of my drill relatively low, and would periodically check the temperature of the sander by holding it to my hand (with the drill stopped, of course). So I'm really happy with this product and with my free-form, live-edge bowl.

I've since bought a full selection of sanding disc's. The pad is the perfect size and softness for sanding lathe turned bowls. Sanding disc's go quite a long time before needing to change also. Excellent product at a fair price.

I didn't have problems with the stem breaking like others. the foam is starting to separate though. Used it to sand 2 scrolled out bowls and a few other projects. Made light work of it, not really made for allot of heavy sanding. I will look for a different one but I would buy it again if a better one is not found.

Good quality for the price

The freight charge was almost the same as the cost. I will be more careful about making sure it is from Prime. This is an ordanary cheep foam based sanding tool and not worth the money.

Very handy in turning bowls on the lathe