Syncwire Cell Phone Ring Holder Stand, 360 ° Rotation Finger Ring Kickstand Polished Metal Phone Grip Compatible with iPhone, Samsung, LG, Sony

I bought this is Dec 2022 and it is still going strong in Feb 2026. More recent reviews cite problems with the ring hinge loosening or breaking, but I haven't experienced this. Hopefully the company hasn't cheapened the product because I need to purchase another one for a new phone. Pros: strong magnet, strong ring hinge, adhesion has remained solid for 3 years, love the ability to rotate the ring and prop my phone different ways Cons: adds significant weight to the phone, black coloring has started to rub off a little after 3 years

Love these. This is the third one I’ve bought. Easy to install, last until my phone dies and or until I need a new case. Only bummer is they aren’t transferable, but flip the coin and it’s never come off. They are also magnetic so it works with the magnet on my lifting rack. Not powerful enough for a magnet car stand. But I don’t use those that often anyway. I will continue to buy these until they no longer make them.

I've bought these at least four or five times over the years, I love them. The adhesive is really strong, and I especially love that I can fit two fingers in the ring, which helps me keep my phone stable as I scroll or type. The only times I've had to replace them were when I was switching cases, or when they came off a silicone case (more on that below) because the adhesive can't be reused more than maybe once. Sadly, these do not stick very well to silicone, although probably still better than anything else on the market. They stay put for a couple of months but eventually come off. After a couple rounds of this happening, I decided to glue the ring to the case using sil-poxy. On the plus side, that's never coming off; on the minus side, that's never coming off 😂 I've never had one of these break, and I wear the absolute heck out of them. However, my latest one did become a bit loose and wobbly over time. Rather than play chicken with a $1000 phone, I decided to go ahead and replace it. Unfortunately, since I permanently attached it to the silicone case, I had to replace the case as well 😂 But seriously, love them, can't live without them. Have tried other ring holders and they all just suck in comparison!

This phone stabilizer ring looks and feels like a quality product. I like the sleek, understated look. My first impression about the large ring was that it was so large that it put pressure on the adjacent finger above it. However, spreading my fingers out a little helped with this. The large ring does make it very easy to slip your finger (or even 2 fingers if they are small) in and out. One major benefit of the larger sized ring is that it works exceptionally well as a kickstand. I have mine placed lower on my phone as opposed to being vertically centered, which results in the kickstand working well for phone viewing in both the vertical and horizontal positions. The mounting button does have a sharpish top edge but I have never found it to be uncomfortable when I'm using it as another reviewer has mentioned. Since the ring is connected to the side of the mounting button, once the ring is folded back down it is very flat and smooth and slides more easily into a pocket than those with the ring connected to the top of the mounting button. I've been using this for about a month and the hinge is still holding firm. I am on my phone a lot but never use the ring as a fidget toy. At this one-month-out point I am very pleased with the Syncwire cell phone ring holder and, unless things change, will definitely purchase again.

Very sturdy and not as bulky as a pop socket. The metal is very shiny and the hoop is easy to use. Definitely recommend

I attach it to my phone case to prop up my phone to watch something and to hold onto when using my phone so that I don't drop it. I've had it for 4-5 years on my previous phone. The only issue is that the paint starts wearing off and the hinge becomes weak after a year or two, but it still worked just fine. It is ferromagnetic so you can use it with magnetic mounts. It will save you from dropping your phone and is well worth it for the price. There are a few other options available but this one worked great for me and is very low profile.

Works, but not as strong as I'd like it to be

How did I live this long without this product?! This simple little ring has completely changed the functionality of my new iPhone. I love the new phone, it has a huge screen, it has amazing cameras, and so much more. The main issue is that it's physically huge! It's massive and quite difficult to use with one hand. It's easy to hold but when it comes to typing with your thumb on one hand there's a very real risky feeling that the thing is going to slip from your hand. My wife has one of those pop things on her iPhone X case and she sort of likes it. She likes it because it makes it more secure in her hand but she doesn't like that it's plastic and not really confidence inspiring when holding it. Once she put my much larger phone in her hand and used this ring she said "order me one now". Seriously, it's that good. The back of the ring comes with a 3M adhesive circle and says to wipe clean the phone or case (and it comes with an alcohol pad which is nice) and then peel off the sticky backing and hold for 10 seconds. Well, as you can see from the picture I did more than hold it for 10 seconds. I used a vice grip to hold that sucker on there for a few minutes as tight as I could squeeze that thing. Is that overkill? Maybe, but I wanted to be sure that if this thing ever lost its hold on the phone it wouldn't be for any mistake that I made. I love that this is made of a hard metal and not plastic. As I mentioned before that is one big plus that my wife loved instantly. It really feels solid and sturdy. The ring itself rotates endlessly 360º around the base that sticks to the case allowing you to hold the phone in either hand however best feels comfortable. It's important to note that the ring does not "spin" as in fast. There is some tension behind the ring so you actually have to raise the ring at a 90º angle to the phone and gently rotate the ring gently so as not to rip the dang thing off the phone/case. I don't know if that would happen - I'm not disparaging the 3M sticky - I just don't want to test it and find out. But again, it doesn't just spin around the base like some spinner toy, you actually have to position it where you want it and it stays firm. When the ring folds down it is only very slightly more thick than the extrusion that goes around the camera housing portion of my particular case. Of course all cases very so keep that in mind. I have an extremely minimalist and thin hard case that is more form over function but still keeps the case secure and allowed for a very good adhesive surface for the 3M sticky. When the ring is extended it can be used as a kickstand for the phone itself as you can see from some of the pictures. Of course I had the phone out of the case to take the pictures but rest assured that it functions flawlessly with the phone in the case as well. I installed my ring a little south of center on the phone as that felt more comfortable in my hand to use. Even at this slightly lowered location it functions beautifully as a kick stand for the phone. Seriously, there is truly nothing I don't like about this ring. I hope that the 3M sticky pad holds firm for a long long time because this is the best thing I've bought in a long time. Well, best two thing since my wife demanded I buy her the rose gold version for her phone now too! Just buy this! You won't regret it.

すごくしっかり、付いて、どんなカバーの製品でもしっかりだ!

SPEDIZIONE, IMBALLAGGIO E CONFEZIONE Il prodotto è arrivato puntuale e contenuto in un classica scatola Amazon con apertura facilitata in cui ho trovato la confezione del prodotto contenente: un piccolo manuale (anche in italiano), una salvietta di pulizia, 2 adesivi di ricambio e l’anello, il tutto contenuto in un blister di plastica. MATERIALI E REALIZZAZIONE Gli adesivi sono della 3M (fra i migliori collanti sul mercato). L’anello è realizzato principalmente in lega di zinco nella parte circolare centrale adesiva e acciaio inossidabile nella parte dell’anello. La rotazione massima consentita è di 360° e oltre ruotando continuativamente (per intenderci, come un fidget spinner). L’angolazione massima dell’anello invece è di 180° ovvero, è possibile stenderlo completamente. Le dimensioni sono di 35.8 x 4.4 per un peso di 18.75 g. ESPERIENZA D’USO Avevo comprato un anello per smartphone e mi ero trovato molto bene, tuttavia la struttura centrale era in plastica e quando mi si è rotta e staccata dal resto della struttura dell’anello, non si teneva più impedendomi così di sostenere lo smartphone con una mano sola tramite proprio l’anello. Ho quindi preso questo prodotto per via dei materiali, non volevo che si rompesse nuovamente: effettivamente zinco e metallo fanno decisamente la differenza, si sente anche al tatto la differenza netta con il vecchio anello che avevo, anche per via della differenza di peso (apprezzo sia un po’ più pesante). La pezzetta per la pulizia rimuove sporcizia accumulata sul retro dello smartphone poggiandolo o impugnandolo permettendo così di incollare l’anello senza che si possa scollare. L’anello è veramente solido e la “cerniera”, se così si può chiamare è abbastanza rigida da permettermi di usare l’anello anche come stand sulla scrivania per tenere lo smartphone landscape/orizzontale e persino in portrait/verticale (dipende ovviamente da dove lo posizionate). La presenza del magnete nella parte rotonda centrale è comodissima per poter agganciare lo smartphone ai supporti magnetici della macchina o anche ad altre superfici metalliche. Veramente comodo! CONCLUSIONI Fra quelli che ho avuto è decisamente il migliore: in metallo difficilmente si potrà rompere, o sicuramente non in breve tempo e la verniciatura non potrà andarsene. Anello solido, pesante e compatto. Cerniera resistente e piena libertà di movimento. Lo ricomprerò se mi si dovesse rompere, possibilità alquanto remota.

J'ai été surprise par le packaging qui est d'excellente qualité. On voit que c'est un produit bien fait et bien fini. Anneau solide et sobre. Il colle parfaitement à ma coque de téléphone.

Cet anneau est excellent, je l'ai depuis juin 2025 donc 7 mois et il est toujours parfait, la rotation est toujours bien solide et maintenue, elle n'a pas perdu de force comme la plupart des anneaux que j'avais avant.

Followed the "mounting" instructions thoroughly and this baby sticks perfectly! (Happy to back of phone / backkof Cover & Do Not use for 12hrs!) My phone has never felt more secure in my hands 👍🏾. #iRecommend.