LEVER ACTION RIFLE SIGHTS

My eyes have changed over the years and it is hard to see the front site on my 30-30 Winchester. I bought these sites in the hope that it would help me see the front site. They meet and exceed my expectations. Installation was quick with the right tools and zeroing the site proved to be a simple tap or two to line up the front site. Much more enjoyable, visible, and useful.

packed well, fit rifle perfectly

I bought a Henry Big Boy lever action rifle in .357 Mag. I was so excited to get out and shoot it, but when I finally did, I couldn't hit the broad side of a barn with it. The Henry comes with some pretty bad stag horn sights, and with my old eyes I could not get a good sight picture. I replaced them with the TruGlo sights, and immediately was able to sight the rifle in and start hitting what I was aiming at. I'm now able to repeatedly hit the 4 inch square iron target at our 50 yard range 10 out of 10 times repeatedly. These sights for me, on my rifle, made all the difference between a rifle I wanted to send back, and one that I'm extremely satisfied with. The rifle no longer has that old west stag horn look, but I now know with great certainty that when the zombies attack, I'll be able to hit them in the head every time.

Much better & brighter than the stock sight. It should be much easier to see during low light. Relatively easy to install on a Winchester Model 94AE 357 and can be done at home. Cost was reasonable compared to other aftermarket sights. I recommend purchasing this sight.Updated 9Feb21: I dropped this down to 4 stars. I still think this sight is significantly easier to see than the stock sights. But, I dropped it to 4 stars because it was not plug and play w/my rifle. W/the rear sight all the way down, my rifle is still shooting very high. This set comes w/a .450" front sight. I've since ordered a .530" front sight to hopefully lower the placement of my shots enough to zero my rifle w/this set sight. Since it's not clear which front sight size is needed for every rifle combination, it makes getting these sights set up a bit of a guessing game.

I can't honestly give a full full review of this product because it isn't made for the H001 rifle with the round barrel and that's what I have. I can only wish that Truglo would make the fitment more clear.For those that have an H001 rifle with a round barrel, the front sight post is NOT removable. You're stuck with the black post. The only way to replace it would be to replace the whole front barrel band that the sight post is on. I'm sure someone might make that product, but this is not it.The rear sight is removable, but this product is designed for the octagonal barrel, so the fitment is awkward. It works, but it doesn't sit flush.I bought this product about 2 years ago and forgot to install it. Then I broke the rear sight, so I tried installing it and those are my findings. I'll keep the Truglo rear sight on it for now as it's my only option.These Truglo sights are admittedly quite bright.Be very careful during installation. I don't know what kind of metal Henry uses to make these rifles but it's incredibly soft. The finish scratches easily, the metal parts inside the action can easily deform, and worst of all the screws are very very small, soft, and require a large amount of torque to unscrew. This means it's very easy to strip screws. I wish Henry would make them larger or harder, or Truglo should include replacement screws with this in case you lose or strip the existing ones.

Oh boy! Do these sights make a difference. I really love TruGlo sights and use TruGlo TFX Pro’s on most my handguns. The original sights on my Henry look good, especially the front sight with the bronze bead. But to shoot...not so much. These TruGlo sights are like night and day and I really enjoy shooting my Henry’s with “irons” now. I like them so much I have now bought sets for all four of my Henry rifles.I found fitting them was pretty easy. Three rifles I had no trouble gently knocking out the original sights using a punch and install the replacement sights. But the fourth rifle I could not remove the front sight and had to take it to my gunsmith who used a sight pusher to get it off.

The front sight is very good. It is made by Marbles Arms and is style number 45MR. It is steel and CNC made. The rear sight is very poor quality. It is made of aluminum and plastic. I do not know who made this part. The plastic part never saw a CNC and the dovetail looked like a flint knapped arrowhead. The dove tail should be smooth and strong to allow for windage adjustments. This damage to the sight had to be done at the manufacture. I removed the windage screw and slid the plastic sight out. It appeared like the dovetail was forced into the aluminum dovetail when the plastic was warm. Because large pieces of the dovetail was missing I doubt any windage adjustment would hold for long. I returned my order as defective. Marble Arms should be upset that their parts are getting repackaged with low quality products.

Typical TruGlo product with good quality especially for the price. This set doesn't come with the red or green front sight selection but TruGlo does have a set that does. Quality is good, metal not plastic bases, easy enough to install. The front sight could be a little brighter in the sun light.

My husband is very pleased with his order thank you so much!!!

Installed these on my Winchester 30.30 lever, certainly helps these old eyes!

Me lo quedo por qué no tengo más, pero la fibra es malísima, tiene demasiada abertura en el alza para lo delgado que es el punto de mira, además de ser curvada la abertura, estos dos factores hacen que sea muy difícil la precisión, por otro lado si consigues que la fibra se ilumine también están muy separadas, así que si quieres algo de precisión a más de 25 metros ni la compres.

Top Ware, gute Preisleistung.Immer wieder gerne.

MONTE SUR UNE NORINCO JW21 EN AJUSTANT LEGEREMENT LA MIRE.