ToToT 2-Pack 20mm Ultrasonic Mist Maker Fogger Ceramics Discs with Wire and Sealing Ring

I had to cut plastic plug in connector off since my humidifier had soldered connections. So I just used tiny marrette wire nuts to connect the new wires and the existing wires together. The wires on the new piece are extremely thin. Not much metal there. But it was enough to connect to the old wires. Should have soldered the joints but didn’t have a soldering tool. Humidifier works as it did before now.

My Crane was still blowing air and you could see the disc bubbling the water in the basin but no mist. I replaced the ceramic piezo disc with this one and it fixed the issue. Silicone grommet was not the correct size so I used the old one. The disc itself is the correct size. Had to cut the connector off and splice the wires together but shouldn't be too difficult for you if you're already the type who's willing to take the the humidifier apart to repair it. Now it's pumping out mist like it did when it was new. I noticed that my old disc had some chips in the surface. I think this maybe an indicator of it being damaged and needing repair. After a week, the new disc already has a chip and somewhat degraded performance but I think that is because the level sensor on my humidifier is a little flaky and let the water level go all the way down without shutting off the disc so it got too hot and took on a little damage.

the paint wore off and the ultrasonic function in the humidifier stopped working in less than a week. They don't seem to be very high quality.

Great level of mist, I did order the wrong size but made it work with a harbour freight o ring seal. Its working great no leaks for a week non stop.

For some mysterious reason our Young Living rose diffuser quit working. It may have been because it was 5 years old, it stayed in the garage all summer, or perhaps its heart was two sizes too small. Whatever the reason, its age or its electrical conductivity, our diffuser would flash and turn off. I checked the disc, which turns out to be 20mm, and found this inexpensive replacement 2-pack. After replacing the disc, the diffuser didn't want to start right away and shut off several times, but I kept pressing the start button, and its been running for about 20 minutes now. This ToToT 2-pack was less expensive than the $15 replacements elsewhere AND it has the correct plug, so no soldering needed. I was able to reuse the Young Living seal instead of using the provided silicone ring. The only drawback, which isn't a deal-breaker, is that the new wires are a tad short and a different color (the original disc has the long yellow and purple wires).

Did not fit Young Living Diffuser

After my humidifiers ran dry and stopped making mist, I looked for replacements but fixing them was way cheaper and this was the only part I needed. If you're not afraid to take your unit apart and have a soldering iron at home these work a treat.

These are not compatible with younglife diffusers. I bought because many people reviewed them as compatible. They are NOT! The wire is also very short. I connected it but would be better with more length.