AUTOUTLET 20PCS 10Pairs XT60 Bullet Connectors Plugs Male & Female with Heat Shrink for RC Car/Boat/LiPo Battery

After much googling, I finally brought these as my first experience with xt60 connectors for an electric scooter. These are super high quality, tough plastic and real thick metal contacts. A breeze to solder to considering most people say that xt60's take some getting used to. Wasn't a single dodgy one in the bag, the heat shrink is high quality and I am super pleased with how professional my first go with xt60 connectors turned out

The material and construction is exactly what you would want. They solder easily but be sure and use plenty of heat to get it done quickly. I have connected up to 10AWG (low voltage) which is unfortunately thicker than the shrink sleeve provided. Don't do that and you will be OK.

The connectors are great but they come with a nice set of heat shrink but as they are being used on any battery from a 2s up to a 6s lipo the wires On the batteries are just one size bigger than what they send so the heat shrink is no use. They they put the next size bigger it would be a 5* buy. If you have the right size for your wire that's OK but as the item comes I found the heat shrink too small.

great DC connections everywhere remember to have the female connector attached to the battery side really easy to use and better than choc blocks

I use XT60s a lot. These are made perfectly well - I love the perfect size heat shrink tubing. They solder well. Good value for money - I have no hesitation in recommending them. Keep safe...

I have now converted all my models over to XT60’s. The heat shrink in the pack was useful as I normally only buy black. Having the red helps to spot mistakes easily. I would recommend soldering these whilst make and female are plugged together to avoid misaligned pins after soldering.

Good quality connectors, I can recommend them. The heat shrink is a bit thin - if you leave any rough edges on your solder joint they can push through.

Good quality with heat shrink tube included. No issues.

Great. works very good on my RV lights. This the second set.

Helt rätt

Do not buy. Very difficult to solder to a wire. Tried with paste fluxes etc and it won't solder. Did a sanding of the gold plating to allow to adhere better but not able to get a good solder at all. I now have a junk that cannot be returned. Best buy a ready made cable Tamiya to xt 60 female. Though it is costlier but saves you the effort of struggling to solder it. You cannot have too high heat on the connectors or you risk damaging the encased plastic holding the pins.

Entgegen vielen China-Klonen handelt es sich hierbei um Original XT60 Stecker, denen man auch die versprochenen 60A zutrauen kann. Jeder China-DIY-3D-Drucker-Besitzer wird das Problem ggf. kennen von den Heizbetten, die mit billo Kopie XT60 Steckern ausgestattet sind, und gern mal das Schmoren oder sogar einen Brand anfangen. Hier findet sich original Ersatz. Ich habe die Stecker im Einsatz in einer Solar-Anlage (Ecoflow Delta 1300) und auch dort passen sie wie angegossen. Der Sitz ist so gut und so stramm, dass man Buchse und Stecker ohne aufgelegte Kabel nicht mit den Händen auseinander bekommt. Top.

とても良い商品である