Gasoila Soft-Set Pipe Thread Sealant – Non-Hardening Paste for Metal & Plastic, 1/2 Pint with Brush Cap – Reliable Leak Prevention, Drip-Resistant, Temp Range -100 to 600°F, Made in USA

Working in carwash service I repair water chemical and hydraulics constantly. This is the go to sealant for everything and works when teflon tape won’t. Use on plastic and metal. I keep one in the truck 24/7 and won’t use anything else.

Great product. Easy application and seals well.

Good stuff, no leaks

worked great, used this on a diesel tank orifice that was leaking, two weeks later still not leaking which is longer than the last product I used. easy to apply and adhesion to the surfaces was good. Great value for the price.

The product seems to live up to its name. It initially is like a thick paste that you apply to the treads of the pipe. After a while, depending on temperature, it sets up to a chalky solid. I used it on gas appliance threads and I detected no leaks. It does not get rock hard so the pipe / fitting can be easily removed when needed. I had a shower head that I consistently had a leak problem at the cut-off attachment. I applied this sealer to it and it sealed the leak at full pressure. Better than Teflon tape. But I can't vouch for it over long time usage, this is only an initial evaluation.

Very good thread sealer. Used it on water lines and had no leaks!

Works perfectly! Used it on the threads is a tuff jug fuel jug that the cap kept leaking on. No more leaks, and it's been months since I put it on! For clarification, I used it on the threads where the hose connects to the cap, not where the cap connects to the jug, as that joint needs to come apart to refill the jug.

Used it with brass fittings to a gas tank and it worked pretty good

Parfait pour le propane vapeur ou liquide

Hi ; This is an excellent product, expensive but good with exceptions . I used it in a well water system, approximately (40-60 psi range) my fittings were primarily stainless to stainless, but I had a couple of brass fittings also . The Exceptions : Gazoila is a wonderful, soft set product, easy to work with, but you MUST tape first , then apply the Gazoila over the Male taped threads . I used 2 full wraps of good high density tape . A brush ( supplied) makes easy application, and try and stay in the clockwise direction, the same as the tape . The other notable exception, even though soft set , it requires “dry time” . I went on the safe side and gave it a 24 hr set, with no water . This is for potable water , other elements, might be different, I.e. natural gas, propane, etc . One more thing “extremely low shelf life” for the money, no more then 1 yr !!! So check your dates . I hope this helps out . Regards ….

VERY GOOD

Supérieur au téflon, facile a utiliser, aucune perte de gaz.

Conforme et reçu rapidement