120Pcs Clear Rubber O-Ring Keyboard, O-Rings Keycaps, Switch Dampeners Keycap, for Cherry MX Key Switch Keyboards Dampers,Blue

These are really nice, I had to replace the keys on my Razer Blackwidow with some phantom keycaps, and as I have very noisy green switches, I thought I'd take the opportunity to add some O-Rings to quieten it down a bit, and these certainly do that, much quieter than before, and improves the typing experience. They work well and don't seem to affect key presses in any way, especially when gaming. Very easy to fit at the same time I was replacing the keys, and plenty to do the entire keyboard. These look like they are going to last a long time, and no complaints about the price..

I bought these O-rings to help silence my Razer Huntsman TE keyboard. It will certainly quieten your keyboard if you place two O-rings on the stem of each keycap as some folks are advocating, however I would recommend *against* that. I found that doing so makes each key press feel 'mushy' and unsatisfying. Instead I recommend : 1. reducing echo by filling the void spaces inside the keyboard with EVA foam sheets cut to size. 2. reducing the key stabiliser rattle/chatter by lubricating the stabilisers using synthetic grease. There's no need to disassemble the switches, just apply a small amount with a brush around the stabilisers and areas of the switch housing that are in the vicinity. 3. finally reduce the impact * of each keypress by adding a single O-ring to each keycap stem. Each of these steps made a significant improvement to my experience using the keyboard - as a result it's noticeably quieter and more pleasant to type on. * Using a single O-ring reduces the impact felt when you bottom out each key press, making the keyboard less tiring to use over prolonged periods. I did make an exception for the 'Enter' and 'Spacebar' key caps, where I doubled up on the O-rings as these keys were particularly noisy.

Seems like they take a while to "break in" but after that typing is comfortable.

I got these to help reduce the noise of my Logitech Pop Keyboard and have definitely noticed a difference by using 2 O loops for each key. Since I need to bring this keyboard to the office I’ll be getting another pack to add 3 loops to each key just to ensure I’m not annoying anyone with the clacking!

Could have got these lot cheaper from elsewhere but these were available quickly, were the correct size for keyboard caps without needing to search around on Asian sites.... Used for dampening the downstroke key noise on a keyboard, some don't like the feel but I can't tolerate the clatter so they do work - whether they work for YOU is a different matter - at the price, nothing really lost.

Got these to put round wobbly joints and they worked a treat

If you use a mechanical keyboard I would recommend these. They don't make your key presses silent but you'll notice that the noise from key pressed is reduced considerably. I'd recommend putti g two rings on each key. Before I bought this product I was a sad boi, now I'm a sad boi with a quieter keyboard. I rate this product a tiny white ring out of ten.

Keyboard - Akko 5075B with Akko Piano V3 Pro & Cherry keycaps. I tried the O-rings but unfortunately they are unusable. 1 made no difference to the sound at all. Two or more did start to reduce the sound, but the keys would occasionally not register. Had to take them all off.