E-Z Products 4 F.S. White Pool Tile Grout Repair Kit - Fast Setting Underwater or Above Water White Grout for Tile Restoration - 3 Lb.

Works great, even under water and dries hard.

I needed to reattach a handful of tiles around the waterline of a pool for a friend. I think there were about 7 tiles that needed attention. I took the time to chisel off residual grout from the tiles and doing a dry fit, before starting the bonding process. I used the EZPatch4 for bonding the tiles in place and for the grout around the perimeter. The EZPatch was easy to prepare and did a great job holding the tiles. Mix ratio is pretty sensitive and I had a tendency to bounce between undershooting thickness and then overshooting before getting the ideal 'mashed potato' texture. The grout was effective both above and below the waterline. The set up time was pretty fast (on the order of a few minutes) before it stiffened and solidified, but there was enough warning (gradual heating and thickening) to allow me to wrap up. I got the 3 lb container but could easily have gotten away with the 1 lb container.

This stuff settled nicely. However it was very tough to work with. Getting the right amount of water to powder was the toughest part and it want to dry out quickly once you have right consistency. I put it on 4 tiles that fell out under the coping of my pool. They sit partially in water and partially above. I was concerned this would be an issue. However after settling overnight it is solid as a rock above and below the waterline. The color is nearly perfect, should look the same after some time as it looks new compared to grout on the parts around the mended area. Great part was it worked as both mortar to reattach as well as the grout. Good stuff!

As long as you adhere to small batches, you can not beat this for pool coping. It sets up really fast, so that does slow down the progress a bit since you have to keep mixing up the small batches as you go, but the end result is outstanding. Only bought two 3 pound jugs first to try it out, but went back and bought a 50 pound bucket to finish the project and have some for minor repairs and such going forward. Not sure how this would fare going under water as it dissipates very quickly when submerged, but I could see mixing it to a drier state than what I am using (like instant mashed potatoes) could help it stick to the joints under water.

Really solid, strong product.I redid the grout for the tiles at the rim of the pool. There was big holes and missing or almost gone grout along the entire pool edge. It looks so good now! Used little amounts and added water or more powder to get proper consistent. Wish I had a before and after. I did not try to do this under the water but there was very heavy rains after I applied and I didn’t lose any of it I’ve never really worked with grout before but it wasn’t hard at all.

Watch how much water you use. It takes longer to mix to consistency and longer to dry. You don't want to waste too much cement. After drying and inspecting, I am not confident that this will last long. It seems to be flaking even though I filled a fair amount of cement and filled in the edges flush. I have let it sit for 3 days now and it feels fine for the moment. There is no "hollow void" sound when I give the tiles a knock but time will tell. If you are working with tiles above water level, it might be a better idea to buy EZ Patch 3 to cement the tile on the first day and use EZ Patch 4 as the tile grout on the second day. Also, the Amazon description mentions to put liquid bonder, however the bottle label on the EZ Patch 4FS has no mention of that. It only says to mix with water. EZ Patch 4 Tile Grout bottle mentions to put liquid bonder. So be careful of which one you order. Edit: It's now August 2023 and the tiles have started coming loose. So this stuff doesn't last long. I will have to use thinset cement and grout separately.

This was my first time using E-Z patch White Pool Tile Grout (FS) and this stuff works! E-Z Patch mixes easy, is easy to apply and sets up fast in less than 5 minutes. So, only mix the amount you can apply in 5 minutes or less and wipe down the excess with a wet sponge immediately. The color matches my 17 year old white grout pretty well (hard to tell the difference). E-Z Patch grout drys rock hard in less than an hour and was applied above and below the water line without any problems. It's more expensive than the big box store brands but sets up better and dries faster. You only get what you pay for. Highly recommended.

I am regrouting the tiles in my pool and it is a tedious job. This grout works, but it sets so fast that you dont have a lot of time to use it, so make small amounts and work fast. It goes on like regular grout above the waterline, but below the water it just washes away, so I use small chunks of the hardened grout for that inch that is below the surface. I put it up against the grout line and force it in, then I grout above it like normal. It is the only way I could get it to work.