3170 Ceramic Fiber Paper 1/8" Thick, Size 11" x 12" 10 Sheets, High Temperature Insulation Gasket or Liner Paper for Kiln Stove Furnace Glass Fusing

Used to set glass blocks on in kiln when firing on glass paints and frit. Used couple times to 1225F, so far great. Don't paint with kiln wash, that stuck to glass block but was removable. Ceramic fiber paper allows glass to cool faster as it is not sitting directly on kiln shelf.

The draft inducer gasket on my Amana (Goodman) furnace crumbled apart during disassembly. The replacement gasket is $90.00!!! I bought this perfectly adequate material and cut out a new gasket in 10 minutes. Easy to cut and I made a perfect replacement. $$$$$ Awesome!!

Used this to make a new fan flap for the char griller 980. The silicon flap that comes with it burns out constantly and, without a flap, the temperature is next to impossible to regulate. This 1/8" works well but had to trim a bit at the top to allow more air movement from the fan. 1/16" would probably work better but this is what I had and it's doing fine. Over a year now with no issues.

Recommended seller!!!! AAA!!!

Cuts well, seals well as a gasket, insulates well.

Just what I needed delivered to my house.

I needed a new gasket for the pellet stove. went to the place where I got it stove! they had none in stock. they said it might take up to two weeks to get one I ordered this stuff from amazon ,had it in a few days! it was so easy to cut with a razor and it gave a nice tight seal!!!!

I purchased this product to line the inner floor of my oven (not inside the over itself, but between the sealed bake element and the oven floor. The description says the ceramic fiber sheets will insulate up to 2300F. After I installed them, I set the oven to 350F as a test. Within five minutes, there was smoke pouring out of the back panel of my oven. I sit everything down and turn off the breaker. After the oven cooled, I removed the fiber sheets - they were charred and had fallen to pieces. I will never purchase from this seller again. What a waste of money, time and effort.

I needed new gaskets for my pellet stove. These sheets were the perfect raw material. I cut them to the size I needed, and it was much cheaper to buy these sheets instead of a gasket kit from the manufacturer. They resist the exhaust heat just fine.

This is the only gasket that doesn't burn out in a few days for my Englander wood pellet stove behind the burn pot

Nice to work with, but not suitable for the hot face of a melting furnace. I had this as a barrier between the elements and the crucible, and it smoked and charred any time the elements came on. The elements were 25mm away from this product. I also had it lining the lid, which also degraded rapidly. It seems the 2300F rating is overly optimistic, I was only running the furnace at 1500f

Excellent worked great to make new gaskets for my rv furnace very easy to cut into shape would buy again if needed works as described