NT-H2 10g

My CPU was around 60-68 degrees at idle, and was always quite high, I never suspected my thermal paste I thought it was my cooler, however I repasted my CPU, and now on load its flipping 57 Degrees avg using cinebench multi-core rendering, at idle temps are around 43-48 Degrees which is average. This thermal paste is amazing and is much better than my old Arctic MX-5. Decent price, although it is higher than other brands, it is worth it for what you are getting. For my GPU, I also repasted it with this thermal paste and also had good performance, on cinebench it was averaging between 60-63 degrees. Overall this is an amazing piece of thermal paste, and you should definitely try it.

Tackier than NT-H1, but thermally better. Buy with confidence. There's probably only Kingpin paste that is better. I personally had a bad experience with Kryonaut, when temps soared after only a few weeks/months. Apparently that was a well known problem and fixed by Thermal Grizzly. NT-H1 and H2 lasts however, and is thermally equal to or better than Kryonaut. Better in my opinion.

Stripped my sons HP Omen PC down and cleaned n replaced the thermal paste on his Intel 11400F. Running at around 40/45 at idle now, compared to 65/70 before. Also, now runs around 70/75 on demanding gaming, compared to 85/90 before. Recommended :) Great value kit, wipes came in handy for clean up and easy installation with the applicator.

it's Noctua, what else can i say

Great paste

NH-2 is better than NH-1 and Artic Silver. Having bench tested NH-2 has improvement in cooling by 3 to 5 Degrees in Aircooled or 2 - 3 in Watercooled at high temperatures. No noticeable improvement in idle temps. But overall, it improved my system performance running a 7700K at 4.8 GHZ at 54 Degrees and 80 Degrees under full load, using Corsair H150i Pro Watercooler. It's my number 1 Thermal Paste now.

Such a good paste - lowered temps by 2C - But the main thing for me was the syringe - perfect applicator, so easy and clean to use compared to normal rubbish applicators. Not much more to say. It’s pricey but well worth it, and I only change my paste every 6 months or so ... it will last me ages!

This is awesome stuff. My CPU (Ryzen 1700 OC at 3700mhz) is now about 10 degrees cooler compared to the old nht-1 thermal paste application. High quality and reasonably priced. The business!

Bütçeniz varsa kesinlikle alın bunu; miktarı yüksek. Isı iletkenliği ( W/mK ) belirtilmiyor ama çok yüksek. Cıvıklığı bir tık fazla ama kontrol edilemez değil. Eski bir macundan kalan bir yayma kaşığı vardı maalesef bunun kutusundan öyle bir şey çıkmıyor, onun sayesinde neredeyse kusursuza (ince ve dümdüz) yakın dağıtabildim. İçinden 10 tane ıslak mendil çıkıyor ama bu mendiller sadece soğutma bloğu için; bunu unutmayın. Resim koymadım çünkü ürün görseliyle birebir aynı. '' X derece kadar ısıyı düşürdü'' diye net bir kıyas yapamam bundan önce de iyi bir macun kullanıyordum yatay geçiş gibi oldu, kasa değiştirdiğim için ihtiyaç oldu ve hiç pişman değilim. Kusursuz havalandırma kombinasyonu yakalarsanız bilgisayarı kurarken bu macun ciddi fark ettirecek, PC en baştan ısınmayacak.

This paste works extremely well. It keeps my Ryzen 9-5900XT running cool (31C on idle, 45C-55C during games and the most at 62C when doing AI rendering). I am using an AIO (water cooling kit) so that helps as well. But the paste is non conductive, so if it spills over to your components on the MB it wont short it out (some pastes use metal in their paste which will short out your MB if there is spillage). Easy to apply as well and enough (the 10g one I got) for multiple use. The main thing with good paste is how well it will hold up over time (unlike thermal pads which dont degrade over time, which also works very well), many paste over time just burn away and dont cover the CPU as good and you have to reapply after a year or so as your temps go up. I applied this paste the first time and used it for a month and had to remove my CPU AIO and even after running my CPU a while to heat up the paste it still held onto my CPU cooling plate really good. I reapplied and it has been running the same temps for the last few months with no problem. But I have used cheaper pastes and after a month or so the temps changed a bit at a time and after a year I had to reapply but what I have seen thus far with this paste is it should hold up well for years (I tend to reapply paste after 2-3 years regardless), but the paste quality of this product seems very good and a lot of science went into developing it. It will not disappoint.

As advertised great product

Muy buena pasta térmica calidad precio. Rendimiento espectacular en gran cantidad

The Noctua NT-H2 10g Thermal Compound (with 10 cleaning wipes included) is one of the best thermal pastes I've used in recent PC builds and upgrades. Pros: Outstanding thermal conductivity — It delivers temps that are often 2–5°C better than stock paste and very competitive with (or sometimes beating) premium competitors like Kryonaut or Thermal Grizzly options in real-world use. On my 7950X, it helped keep all-core loads in the mid-70s under a decent air cooler where previous pastes pushed into the low 80s. Long-term stability — Noctua claims no pump-out or drying issues over years, and from what I've seen in systems running 12+ months, it holds up without noticeable degradation. No cracking or separation I've observed. Super easy application — The viscosity is just right: spreads nicely with pressure but doesn't run like liquid metal. No need to manually spread it — the classic "pea-sized blob" method works perfectly every time. Includes 10 NA-CW1 wipes — These are legitimately useful pre-moistened isopropyl wipes that make old paste removal clean and quick without leaving residue. Saves buying separate cleaner. Non-conductive and safe — No risk if you over-apply slightly, unlike some liquid metal alternatives. Minor cons / things to note: It's not the absolute lowest-temperature paste on the market if you're chasing extreme overclocking bench records (some hybrid or special pastes edge it out by 1–2°C in synthetic tests), but for 99% of users — gaming, productivity, silent builds — the difference is negligible. Price is a bit premium compared to generic pastes, but you get what you pay for in consistency and longevity. The 10g tube lasts for many applications (I've done 6–7 full CPU + GPU pastes from one tube so far). Overall, 5/5 stars from me. If you're looking for a "set it and forget it" thermal paste that performs at a high level without drama, NT-H2 remains one of the top choices in 2026. Highly recommended for anyone building or maintaining a serious PC. Noctua nailed it with the second-generation formula.