Door Window Sensor 7 Pro

I picked up two PRO versions and wired them to my furnace and dehumidifier water pumps. If the pump stops working the pump will fill and trigger the overflow switch wired to the sensor. My home automation hub then sends me a notification that the reservoir is not emptying so I can deal with it without water overflowing. This was really easy to setup. Tested and works perfectly. Plus, the batteries can last years! Since the switch has yet to get triggered in this use case the batteries are still at 100% after a year in opperation.

It needed to be updated out the box. Aeotec no number to call all on line. Samsung help a lot and getting things working. Once I understand what I was doing and how they made the security on the device so that they can be updated them it move along fine I will buy them again they're very secure

I didn't have any issues with the setup, and I got it into dry contact mode using the 5x button press method, but after that, it's been a mess. The app reports it's open and then closed, then open, and the switch and contacts are not being touched. It randomly changes status and sends out notifications. I also noticed that when I refreshed the app view, it would toggle from Open to Closed, and within 10 minutes, the battery level went from 100% to 96%. This thing is garbage and totally unreliable. It's being returned.

I've got several of these, and they are great. Simple door/window sensor, as well as providing an interface for other wired contact sensors, like garage door sensors or ones that are wired into homes/doors/windows already. Even has a tilt sensor. Works great. Worth the price.

I needed an open/close sensor to integrate my Dakota Alert BBA-4K-Plus IR Break Beam Solar Powered Motion Sensor Alarm System. In my situation I wanted to know if a vehicle or person crossed my daughter-in-law’s 220 foot property line running parallel to a road right of way. The Aeotec 3-1 Door/Window Sensor was very easy (Thanks to an article from the SmartThings Community Forums) to accomplish what needed to be done. Whenever someone breaks the beam I get a notification via IFTTT & it would be simple to perform other security actions (turn on a floodlight at night, etc.) This sensor worked great!

I felt like I had to write a review after seeing all the negative reviews about issues with pairing. I, too, had issue pairing with my Samsung Smartthings hub. After finding current setup instructions online, I set my hub into exlusion mode, deleted the half-baked z-wave entry in the Smartthings app, factory reset the sensor, and started over. Following the instructions online, I got things running, and the sensors work great. I'm buying more.

The form factor is great, installation and setup was a breeze, but getting it to reliably detect open/close state is severely lacking. It is very sensitive to not so much distance but position of the contact sensor. If it isn't positioned JUST right then it won't detect that it is closed and you will be opening and closing the door several times to get it to detect. But don't do it to quick either because there appears to be some sort of detection cooldown period? The old square contact sensors may've been bulky but by Dog they worked.

Will pair as a motion sensor, but nothing you do will set it off. The vibration sensor does nothing, the magnetic switch does nothing, and the external contact does nothing. It simply says "online" all the time.

Hice la compra del producto hace 3 años, todo funciono bien hasta que se tenia que cambiar la batería. Usa CR14250, es complicado encontrar ése tipo de batería por lo que es costoso. Después de eso el sensor tuvo un corto circuito y dejo de funcionar por completo. Hice el reporte a Aeotec y no sirvió de nada.