---
product_id: 16536420
title: "XLHVTERLI Golf Phone Holder Clip Golf Swing Recording Training Aids,Record Golf Swing/Short Game/Putting,Golf Accessories,Universal Smartphone Holder for The Golf Trolley,car Holder, (Black) (B1)"
brand: "xlhvterli"
price: "9421 som"
currency: KGS
in_stock: false
reviews_count: 8
category: "Sporting Goods"
url: https://www.desertcart.kg/products/16536420-xlhvterli-golf-phone-holder-clip-golf-swing-recording-training-aids
store_origin: KG
region: Kyrgyzstan
---

# XLHVTERLI Golf Phone Holder Clip Golf Swing Recording Training Aids,Record Golf Swing/Short Game/Putting,Golf Accessories,Universal Smartphone Holder for The Golf Trolley,car Holder, (Black) (B1)

**Brand:** xlhvterli
**Price:** 9421 som
**Availability:** ❌ Out of Stock

## Quick Answers

- **What is this?** XLHVTERLI Golf Phone Holder Clip Golf Swing Recording Training Aids,Record Golf Swing/Short Game/Putting,Golf Accessories,Universal Smartphone Holder for The Golf Trolley,car Holder, (Black) (B1) by xlhvterli
- **How much does it cost?** 9421 som with free shipping
- **Is it available?** Currently out of stock
- **Where can I buy it?** [www.desertcart.kg](https://www.desertcart.kg/products/16536420-xlhvterli-golf-phone-holder-clip-golf-swing-recording-training-aids)

## Best For

- xlhvterli enthusiasts

## Why This Product

- Trusted xlhvterli brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

Full description not available

## Images

![XLHVTERLI Golf Phone Holder Clip Golf Swing Recording Training Aids,Record Golf Swing/Short Game/Putting,Golf Accessories,Universal Smartphone Holder for The Golf Trolley,car Holder, (Black) (B1) - Image 1](https://images-na.ssl-images-amazon.com/images/I/413Tjme5moL.jpg)
![XLHVTERLI Golf Phone Holder Clip Golf Swing Recording Training Aids,Record Golf Swing/Short Game/Putting,Golf Accessories,Universal Smartphone Holder for The Golf Trolley,car Holder, (Black) (B1) - Image 2](https://images-na.ssl-images-amazon.com/images/I/510SbpSuPGL.jpg)
![XLHVTERLI Golf Phone Holder Clip Golf Swing Recording Training Aids,Record Golf Swing/Short Game/Putting,Golf Accessories,Universal Smartphone Holder for The Golf Trolley,car Holder, (Black) (B1) - Image 3](https://images-na.ssl-images-amazon.com/images/I/41YpZdttKhL.jpg)

## Customer Reviews

### ⭐⭐⭐⭐ NOT drop-in for Wanhao i3 or Monoprice Maker Select
        
*by W***H on February 11, 2016*

Can't really complain, but the holes in this unit are not correct for a Wanhao i3 or Monoprice Maker Select. The description says it fits all i3 variants, but apparently the Wanhao/Monoprice have their y-axis rods set closer together. If you have one of these printers, you'll need to drill your own holes in the aluminum. Should be able to use your current y-carriage as a template. Just use your bed-leveling screws and wingnuts to bolt your old carriage and this new one together, so you can drill through the same holes. The parts seems to be of great quality, and I imagine it will bring an end to my bed warping issue. Just was expecting it to be a drop-in replacement.
  

### ⭐⭐⭐⭐⭐ Resolved *all* of my bed leveling issues and works with the Wanhao Duplicator i3 / Maker Select 2 with modifications.
        
*by M***L on May 13, 2016*

I do not own a Prusia i3, I own a Wanhao Duplicator i3 and mistakenly purchased this.  I was *horrified* when I discovered that the mount points were very different and that nothing would line up.  Luckily, the corner screws are in exactly the right place or I would have probably returned it.On the Maker Select 2, this part is *really* flimsy, so when leveling, it bent and flexed like crazy, resulting in low quality prints for anything that took more than a few hours since the bottom would eventually bend slightly and throw off the alignment.  It got so bad that one screw was all the way down while one needed to be so loose that I needed a longer bolt.  This carriage is *extremely* sturdy -- at least, if not more sturdy than the bed itself.With everything else properly leveled, I was able to level my bed to half the height of a piece of cheap copy paper at every point and the best part is that it's now stayed that way since I did the first leveling ... after at least 20 prints (I replaced the thumb screws with lock nuts and some of the 3D printed bed leveling thumb screw adapters -- this is likely required if you want those results).  All four of my screws are at almost exactly the same setting now, as well, so it's clear that this part is not flexing at all (I could easily bend the other with just my fingers ... this one is hard to make bend any perceptible amount with my full strength).As it says in the title of my review - this kit works great with the Maker Select 2 if you follow these instructions:To modify to use with the Maker Select 2, remove the old Y-Carriage plate from your printer along with the bed screws and thumb nuts (or whatever you've already replaced them with).  Screw the two together by the four corners, but flip the old one so that the side with the two mount points lines up with the side with the single mount point.  Find a drill bit that fits and drill through the holes in the old Y-Carriage carefully into this plate.  Disconnect and mount it just as the other one was mounted.  You can now take out your aggression on the old Y-Carriage.  Bend, throw (just avoid hitting people or anything valuable).
  

### ⭐⭐⭐⭐⭐ Awesome! Just what you need to replace the wood or acrylic platform to make it more sturdy!
        
*by A***G on September 5, 2015*

Perfect addition to your prusa printer. This stiffens the build platform tremendously and reduces the risk of melting or ruining acrylic. I run this + sc8uu bearings (with pillow blocks) and MK3 Heatbed + Aluminum build plate. This is extra strong and super. Suggest insulating the build plate to retain the heat on the platform with that much aluminum. OR, get a 500W Silicone heater. I recommend using a Solid State Relay and using a 110V heater. You can do the same with a 12V or 24V. To reduce the heat generated on the mosfets of the controller, I suggest using a DC to DC Solid State Relay and using a separate PSU to heat the bed. That way you don't push the controller to its limits.
  

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.kg/products/16536420-xlhvterli-golf-phone-holder-clip-golf-swing-recording-training-aids](https://www.desertcart.kg/products/16536420-xlhvterli-golf-phone-holder-clip-golf-swing-recording-training-aids)

---

*Product available on Desertcart Kyrgyzstan*
*Store origin: KG*
*Last updated: 2026-03-06*